TRAVELER 4all Ergo & 4you Ergo usage instructions
8
Dimensions, TRAVELER 4you Ergo:
Seat width: 33 - 52 cm
Seat depth: 35 - 48 cm
Back height: 22-48 cm
Wheel camber: 1°, 4°, 6°
Back angle: Seat tube / back tube opening
angle 70°-95°
8.5 Service life
The service life of the product is 6 years.
9 Rating plate & markings on the
product
The
rating plate
is located on the product
frame. The rating plate includes the precise
model, the serial number and other technical
specifications.
When contacting your rehabilitation specialist
dealer or PRO ACTIV with regard to your
product, please always have the serial number
and year of construction on the rating plate at
hand.
CE marking
“European conformity”
Medical device
Manufacturer
Follow the usage instructions
Serial number
Date of manufacture
The product is labelled with
further symbols
(stickers):
Product not approved as a seat in mo-
tor vehicles
Product approved as a seat in motor
vehicles; marking of the transport re-
straint system connections on the
wheelchair or fastening points for
wheelchair restraint systems
More detailed information about this can be found
in Chapter 28.
10 Commissioning and handover
The product will be handed over to you ready
for use by a rehabilitation specialist dealer or a
field representative or by a product consultant
from PRO ACTIV.
You will be fully instructed in the use of the
product based on the usage instructions in-
cluded in the delivery. You will be handed over
a record of training and handover certificate as
written proof. In addition, you will be handed
the usage instructions and, if necessary, fur-
ther accessories for your own use. It is rec-
ommended that you take along an assistant to
the training so that, if required, they can assist
you later when handling the product.
During the hand-over, the record of training
(Chapter 39) and the hand-over certificate
including the associated check list (Chapter
40) must be filled in. The rehabilitation special-
ist dealer should send the completed docu-
ments to PRO ACTIV for filing as a file by e-
mail or in the form of a copy by fax or in the
post.
11 Introduction to the product and
the surroundings
During the initial commissioning of the product,
drive at minimum speed and become accus-
tomed to the driving characteristics of the
product. Always adapt the speed and driving
