TRAVELER 4all Ergo & 4you Ergo usage instructions
29
Figure 63: Front side of the spring suspended pres-
sure piece visible (top view)
As a final option for adjusting the force re-
quired when removing and installing the cloth-
ing guard, slightly release the
M5 fixing
screws
(AF 4 mm) and pull the "side section
mount, bolted" along its slots a little further
away from the basic body of the side section
mount or press it a little closer towards the
basic body of the side section mount.
Figure 64: "Side section mount, bolted" with elon-
gated holes and M5 fixing screws on basic body of
side section mount (view from below)
21.5 Clothing guard size
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
The clothing guard (aluminium and carbon) is
available in three different sizes. The dimen-
sions of the wheel arches differentiate with the
different sizes:
30 mm (size 1), 36 mm (size 2),
46 mm (size 3).
Figure 65: Dimensions of the wheel arches
The size of the clothing guard can be read-off
the notches on the bottom edge of the clothing
guard. One notch means size 1, two notches
mean size 2 and three notches mean size 3.
Figure 66: Size marking on the clothing guard
After changing to a wider tyre size or after
changing the wheel camber, it may be neces-
sary to change to another clothing guard size.
Where required, such a change may be ar-
ranged by your rehabilitation specialist dealer.
Size marking for size 2
Dimensions of the wheel arches
"M6 sprung pressure pieces"
visible on "basic body of side
section mount"
M5 fixing screws in the "bolted
side section mount"
