TRAVELER 4all Ergo & 4you Ergo usage instructions
47
Figure 128: M6 fixing screw with washer to adjust
the lower leg length
Once the position has been set, fix the footrest
support tubes by tightening the M6 fixing
screws (AF 4 mm) with washers to 11 Nm on
both sides.
24.8 Safety instructions
Ensure when setting the lower leg length,
that no strong pressure is produced between
the underneath of the lower leg of the
wheel-
chair user and the edge of the seating system.
25 Anti-tipping support
To minimise the risk of tipping backwards unin-
tentionally, anti-tipping supports are available
as accessories. The anti-tipping supports are
adapted to the axle tube via anti-tipping sup-
port adapters and can be swivelled under the
frame using a spring system.
Figure 129: Anti-tipping support
25.1 Operating and passive position
To overcome an obstacle, the anti-tipping sup-
port must be swivelled from the operating to
the passive position beforehand so that this
does not knock against the obstacle.
Figure 130: Operating position of anti-tipping sup-
port (view from the rear)
Figure 131: Passive position of anti-tipping support
(view from the rear)
Anti-tipping bar
Anti-tipping
wheel
Anti-tipping support
adapter
M6 fixing screw
with washer
