TRAVELER 4all Ergo & 4you Ergo usage instructions
33
To check or correct the tyre pressure
,
proceed as follows:
1. Secure the product to prevent it rolling
away.
2. The drive wheel is normally fitted with a car
tyre valve. Unscrew the valve cap.
Figure 77: Valve with cap
3. Place the valve attachment of the com-
pressed air device or the compressor onto
the valve (if necessary, an adapter must be
placed on the valve attachment) and, if a
clamp lever is fitted, secure the connection
by applying the lever.
4. Now check the tyre pressure. If the tyre
pressure does not match the specifica-
tions, correct it.
5. Finally release the clamp lever (if present),
pull the valve attachment off the valve and
replace the valve cap.
Figure 78: Compressor
Figure 79: Valve adapter and clamp lever of the
compressor
22.5 Wheelbase extension
Figure 80: Designation overview with wheelbase
extension
Figure 81: Actuating cable
Front mouth
Axle of the wheelbase extension
Actuating cable
Rear mouth
Valve
adapter
Clamp lever
Valve with cap
