TRAVELER 4all Ergo & 4you Ergo usage instructions
41
Figure 104: Slider in the standard position, footrest
locked
Figure 105: Pull the slider upwards to unlock the
footrest
To
attach the footrest
, release the folding
mechanism from its locked position (Chapter
17.1) and insert the footrest with the support
tubes back into the frame tubes until the foot-
rest locks into place with an audible sound.
Figure 106: Insert the support tubes into the frame
tubes until the footrest locks into place with an audi-
ble sound
Recommended care:
Greasing the footrest support tubes slightly
with multi-purpose grease at regular intervals
is recommended.
24.3 Footrest continuous
Figure 107: Footrest continuous
To
adjust the length of the footrest support
tubes or adapt the lower leg length
, there
are two M6 fixing screws on each footrest sup-
port tube. The upper M6 fixing screw (AF
4 mm) can be repositioned via a hole grid
(three positions are generally available). The
bottom M6 fixing screw (AF 4 mm) can be
moved infinitely in a slotted hole. Depending
on the extent of the length adjustment, only
one of the fixing screws or both of them can be
moved in their position.
Figure 108: Top M6 fixing screw can be positioned
in the hole grid
Top M6 fixing screw
with washer (position-
ing in the hole grid)
Support tube
To unlock the
footrest, pull the
slider upwards
Insert the
support tubes
into the frame
tubes
