Price AW-I Series, Руководство по установке

Страница: 35 / 40

33
priceindustries.com | AW-I - Manual
AW-I
APPENDICES
9. A bead of silicone caulking must
then be run across the top of the
bolting flange and down the side.
If the roof is split, use the supplied
roof cap to cover the joint shown in
Figure 6.
10. Repeat steps 1 through 9 for all
sections of the split air handler unit
until all sections are joined.
11. Install all loose exterior features,
which may include hood
assemblies, exhaust flues and field
sensors. Field sensors should be
wired according to the supplied
electrical diagram.
FIGURE 6: ROOF CAP INSTALLED TO COVER JOINTS AT SPLIT
ROOF CAP