Price AW-I Series, Руководство по установке

Страница: 7 / 40

Unit Assembly
HEAVY COMPONENTS: The unit sections are very heavy
and significant force will need to be applied to cinch the
sections together. Make sure everyone is clear of the
sections prior to cinching to avoid injury.
SLIP UNITS: Price AW-I units may be shipped as a single
unit or in sections for field assembly by the installing
contractor. For proper assembly of split units, refer
to Appendix A of this manual. Failure to follow the
instructions in this manual may void your warranty.
Figure 4 : Split unit sections shall only be pulled together using
the provisions on the base. Trying to pull sections together
from the cabinet walls or roof will damage the cabinet and void
the warranty. Refer to Appendix A.
Figure 5 : Where sections join together, a flanged joining strip
with bolt holes is provided. Refer to Appendix A for detailed
instructions on how to attach these strips and all other
components needed to properly seal between the unit splits.
Figure 6 : Mount any loose items such as intake hoods and
secure them to the unit with self-tapping fasteners.
Figure 7 (on the next page) : Remove all shipping braces, packing
etc. from the unit.
FIGURE 4: TYPICAL BASE CINCH POINTS
FIGURE 5: TYPICAL FLANGE JOINTS
FIGURE 6: OUTDOOR AIR HOOD
CAUTION
5
AW-I
INSTALLATION INSTRUCTIONS
priceindustries.com | AW-I - Manual