Price AW-I Series, Руководство по установке

Страница: 11 / 40

Electrical Installation
ELECTRICAL SHOCK HAZARD: Disconnect all electric power,
including remote disconnects before servicing. Follow
proper lockout/tagout procedures to ensure the power
cannot be inadvertently energized. Failure to disconnect
power before servicing could result in death or serious
injury.
NOTICE - USE COPPER CONDUCTORS ONLY:
Unit terminals
are designed for copper conductors only. Failure to use
copper conductors may result in unit damage.
Main Power Connection
All connections to the unit and the main disconnect switch
must conform to the Canadian Electrical Code/National
Electrical Code and local codes.
1. Before proceeding with electrical connections, ensure that
the unit characteristics and the intended supply match.
The proper voltage for connection is listed on the rating
plate attached to the unit.
2. Unit must be electrically grounded in accordance with local
codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70, and /or the Canadian
Electrical Code, CSA C22.1, if an external electrical source
is utilized.
3. Refer to the unit submittal drawing to determine the
suggested location of the field wired power supply. Where
a disconnect is supplied as part of the unit, the main
power connection will be the line side of the disconnect.
4. If the unit is not supplied with a factory mounted
disconnect, a field supplied disconnect must be installed
in accordance with local codes, or in the absence of local
codes, with the National Electrical Code, ANSI/NFPA
70, and /or the Canadian Electrical Code, CSA C22.1.
Where a disconnect is supplied by others, the main power
connection to the unit will be the line side of the main
splitter block. Refer to unit electrical wiring diagrams for
details.
5. Ensure that the routing of the power supply wiring does
not interfere with removal of any unit access door, or in any
way hinder servicing of the unit.
TYPICAL FACTORY SUPPLIED DISCONNECT
TYPICAL SPLITTER BLOCK TERMINATION
WARNING
9
AW-I
INSTALLATION INSTRUCTIONS
priceindustries.com | AW-I - Manual