Price AW-I Series, Руководство по установке

Страница: 15 / 40

Gas Piping Connection
TYPICAL GAS IN WEATHER HOUSING
The appliance installation shall conform to local building codes
or, in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane
Installation Code, CSA B149.1.
Planning for installation of a Price AW-I unit should include a
piping sketch or plan showing the proposed location of piping
to the unit and feeder branches. Piping should be sized and
installed to provide for the rated input of the burner while
maintaining the required inlet pressure. The maximum input of
the burner is printed on the rating plate of the unit and can be
obtained before shipment of the unit from the dealer or from
shop drawings provided.
TYPICAL GAS LINE SHUT-OFF VALVE
WARNING
FIRE OR EXPLOSION HAZARD
Failure to follow safety warning exactly could result in
serious injury, death or property damage.
Be sure to read and understand the installation, operation
and service instructions in this manual.
Improper installation, adjustment alteration, service or
maintenance can cause serious injury, death or property
damage.
• Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try and light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• Leave building immediately.
• Immediately call your gas supplier from a phone
remote from the building. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call the fire
department.
• Installation and service must be performed by a
qualified installer, service agency or the gas supplier.
GAS BURNER
PRIMARY
FLAME SAFE-
GUARD
MAIN GAS VALVE
FIRING VALVE
APPLIANCE
REGULATOR
13
AW-I
INSTALLATION INSTRUCTIONS
priceindustries.com | AW-I - Manual