
OPERATION
MULTI GAUGE CONTROLLER
. .
NUMERIC KEYPAD
Numerical values in the device can be edited via the numeric keypad. It consists of basic numbers
from to and function keys to enter new data and update the existing ones. The numeric keypad
is shown in ig. . .
Figure . : Numeric keypad
Data can be entered directly from the numeric keypad by entering and con irming the value entered
using the following three methods:
• by entering data as decimal values.
• by entering data as a mantisaa and exponent.
• by increasing/decreasing the current value by a given step.
To increase/decrease the current value:
. Select the value for edition (e.g. Venting Time).
. Press and , to increase the value by .
. Press the
Increment value
key (every press of this key increase the value by ).
. The value has been increased.
. To decrease the value press the
Decrement value
key (every press of this key decreases the
value by ).
. Value is decrement.
. Con irm the value with the
Con irm value
key.
Page
User manual rev.