
MULTI GAUGE CONTROLLER
INSTALLATION
. .
ADDRESS DIP SWITCH
Figure . : Address DIP Switch
To communicate with the MG
controller the device must be assigned with a unique address set
via the address DIP switch.
.
MG
controller with LCD display
To set an address use switches - . They encode the device address in the binary code.
Weights and values of individual switches are described in table . .
DIP
WEIGHT
Table . : Weight of individual switches
Example:
To assign address with a value of
to the device change the position of switches , , to
ON (upwards).
+
+
= 8
Possible settings of addresses are shown in table . .
.
MG
BlackBox version
• with Pro iNet communication socket
DIP
FUNCTION
-
Address
Pro iNet
RS
/RS
Table . : DIP switches functions
To set an address use switches - . Refer to table . for weights of switches.
User manual rev.
Page