OPERATION
MULTI GAUGE CONTROLLER
The data of each session are stored in iles named ChartData_
series_name
.csv. The ile contains
information about the time and value of each point. The time is compatible with the system date
??
.
Example content of the data ile:
Time;data[mbar]
- -
: : .
; . e+
- -
: : .
; . e+
. . .
ACTIVATION OF CHART MODULE
To activate the module:
. Read the product and serial numbers from the
Information
menu
. Read the product key from the
Device Settings
→
Chart Activation
. Contact the sales department (+
lub [email protected]) and provide both num-
bers and the product key.
. After completing the procedure a licence key will be provided, which should be entered after
clicking on the
License key
Figure . : Chart activation menu
After correct completion of the activation of the chart module, the message shown below in ig. .
should appear.
. .
TIMER WINDOW
An additional window contains a timer and information on the current time and date. Elapsing time
is connected with the progress bar located around the Start/Stop button. The value of the timer can
be set in a range from h: m: s to h: m: s. After pressing the
Start
button time is counted
down from the set value to zero. The counting ends with an acoustic signal. When the counting ends
the timer is stopped and the value of the time which has been counted is displayed.
. . .
. . . TIMER SETTING
To set the timer carry out the following operations:
. Press the
timer ield
.
Page
User manual rev.