OPERATION
MULTI GAUGE CONTROLLER
. . .
EDITING OF CHART PARAMETERS
To change the chart drawing parameters follow the procedure presented in ig. . :
•
A
- Click on top ield, with currently drawn data series
•
B
- Click on a selected parameter to be edited
Parameters that can be edited:
•
Sampling period
- the parameters determines time intervals at which another data is added
to the chart. Increasing this parameter extends the maximum time of recording but simulta-
neously decreases precision.
•
Recording time
- the parameter determines time window during which data are recorded.
. . .
CLEARING OF CHART
To clear all to date recorded data and start recording from scratch press the
Clear chart
shown in
ig. . .
Remember that pressing the button
Clear chart
deletes all the data recorded so far.
. . .
VIEW OF PART OF CHART
The chart module enables viewing a selected part of the chart on full screen. For this purpose, as
shown in ig. . (marker
A
), press the screen at a given place and mark the selected part to view
by dragging.
Figure . : View of selected fragment of chart
After enlarging the selected fragment of the chart additional buttons will appear to perform other
manipulations:
•
B
- Enlarging the current chart area
•
C
- Reducing the current chart area
•
D
- Returning to normal recording mode
•
E
- Four arrows to scroll the chart in any direction.
Page
User manual rev.