Installation & Operation Manual TCC70XS
Page 27
1.6.2
Network Set
–Up
If you want to access TCC70XS via
browser
, establish a 10/100Base
–
T Ethernet connection to
your local network as described
in chapter “Installation”. The computer which you have to use
for the network set
–
up must be connected to the same network as TCC70XS. If you have a
firewall running, please disable it or make the UDP port 8001 available for incoming and
outgoing traffic.
You need the
program. It is included on the product CD or available at:
•
Please copy this program to your computer.
•
Turn on the power of all units.
•
Start the
program.
•
Now choose "
Ethernet Module Configuration...
" from the "
Tools
" menu. The following
screen will appear:
•
Press "
Scan Network
" to search for TCC70XS units. All units found in the local network will
be listed. Now choose the unit from the list
. Clicking “
Get Status
” will fill in the
information at
the “Status” box.
•
Click "
N
etwork Settings…
", and adjust the parameters like IP Address, Network Mask,
Gateway, and DHCP. Then click “
Config
“ to store this set–
up.
•
The IP configuration now is complete. Close the "
IP Configuration
" dialog. A new network
scan is started automatically, and the configured IP address will be shown in the list.
•
Now you can close all dialogs.
