Plura TCC70XS Скачать руководство пользователя

Страница: 12 / 128

Installation & Operation Manual TCC70XS

Page 12

Product Damage Precautions

PREVENT OVERHEATING

To prevent product overheating, position this product only where sufficient air

circulation can be maintained. Good air circulation is essential to prevent

internal heat build

–

up, do not block any ventilation openings. Do not expose this

product to direct sun light or any other strong lights. Keep this product away from

heat sources.
Install this product

in accordance with the manufacturer’s instructions.

PROVIDE PROPER ENVIRONMENT

Dust, humidity, shocks and strong electromagnetic fields must be avoided. Do

not expose this product to dripping or splashing water. Ensure that no objects

filled with liquid are placed on this product.

UNPLUG DURING LIGHTNING STORMS

Unplug this product during lightning storms or when unused for long periods of

time. Alternative: Use a UPS or power surge suppressor.

OBSERVE EMC REGULATIONS

The EMC regulations are observed only under the following condition: Use high

quality shielded cables at data inputs and outputs.

SUSPECTED FAILURES

Whenever it is likely that safe operation is impaired, this product must be made

inoperative and secured against unintended operation. The appropriate service

authority must then be informed. Do not operate with suspected failures.

Servicing is required if this product has been damaged in any way, such as

power

–

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into this product, this product has been exposed to rain or moisture, does

not operate normally, or has been dropped.

PREVENTIVE MAINTENANCE: CLEANING

Qualified Service Personnel Only:
This product should be cleaned often enough to prevent dust or dirt from

accumulating. Dust accumulating in this product acts as an insulating blanket,

preventing proper cooling, and possibly causing overheating and component

breakdown. Under high humidity conditions, accumulated dust can also provide

an electrical conduction path. Remove accumulated dust with a soft cloth or small

paint brush. Remove hardened dirt with a soft cloth, dampened in a mild

detergent and water solution. Do not use polish or abrasive cleaners or any other

chemical cleaning agents.

Содержание TCC70XS

































































































































Результаты поиска

Содержание TCC70XS

Отзывы:

Похожие инструкции для TCC70XS

Бренды по названию

Популярные бренды

Plura TCC70XS, Руководство по установке и эксплуатации

Результаты поиска

Содержание TCC70XS

Отзывы:

Похожие инструкции для TCC70XS

Бренды по названию

Популярные бренды