Playcore Swing-N-Slide PB 8233, Руководство по сборке

Страница: 29 / 84

29
Assembly Plan
Rock Wall Assembly.
1.
Assemble Rock Wall as shown in
(Fig. 22)
. Make sure to space the 5/4'' x 6'' boards as evenly as possible.
2. Mount Rocks to wall in a pattern that will allow your child to access the deck easily. Mount rocks per
instructions below.
3.
Attach the Rock Wall to the unit as shown in
(Fig. 22a)
.
Fig. 22
(2)
2-1/2'' screws
per joint
2-1/2'' screw
(6) [PF 3588] 5/4'' x 6'' x 40-1/4''
(2)
[PF
3568]
2''
x
4''
x
47-1/2''
3/8" Holes
(2) T-nuts
Hold (rock)
(2) 1-1/2'' Hex Head Bolts
(1) Loc Washer per bolt
(1) Flat Washer per bolt
Fig. 22b
WARNING:
Verify Rock Hardware BEFORE Drilling Holes
Climbing Rock Installation
1 . Mark locations of Climbing Rocks on the
Climbing Wall in a pattern that will easily
allow your child to climb to the deck
. Make
sure the bolt hole locations are clear of wall
supports before drilling.
2. Drill holes through the wall at the desired
locations using a 3/8" drill bit. Install Climbing
Rocks as shown in
(Fig. 22b) .
3. Make sure the Climbing Wall and Climbing
Rock connections are secure before allowing
any children to play on the Climbing Wall.
Fig. 22a
2-1/2'' GAP
BETWEEN ALL
BOARDS
2''
UNDER DECK VIEW
(3)
2-1/2'' screws
per joint