Pioneer XY-122, Руководство по установке

Страница: 64 / 92

5 Drive unit replacement
___________________________________________________________________________________________________________
(5)
(6)
Replacement of HF drive unit
(1)
(2)
(3)
(4)
(5)
Red Terminal (+) :
Black Terminal (-) :
(6)
Make sure to place the rear terminal box in the same location
as before replacing the drive unit.
Tighten the three M5 hex button bolts of the rear terminal
box.
CAUTION: Make sure to prevent to be caught the cable
between the rear terminal box and HF flange plate.
Remove the two nuts from the HF drive unit with a 10mm
Spanner.
Replace the HF drive unit with a new one and tighten the two
nuts.
Connect the cables to the HF drive unit.
White cable
Yellow cable
Remove the cables from HF drive unit.
Connect the cables to the two terminals.
Red Terminal (+) : Brown cable
Black Terminal (-) : Blue cable
Put back the heat sink, chamber. When securing the chamber,
securely hold the gasket wrapped around the cables in the
lead wire hole of the chamber.
Remove the three hex button bolt from the rear terminal box
with a 3mm hex key
Black terminal
Red terminal
Blue cable
Brown cable
Black terminal
Red terminal
White cable
Yellow cable
http://pioneerproaudio.com/
Page 64 / 92
©2018 Pioneer DJ CORPORATION