Pioneer XY-122, Руководство по установке

Страница: 16 / 92

3 Rigging And Caster Setting
__________________________________________________________________________________________________________
3.1.3 Logo badge replacement
The location of Logo badge attached to the grilles on XY-81/101/122/152 can be changed.
Required tools
XY-81 / XY-101
XY-122 / XY-152
・
Phillips head screwdriver
・
3mm hex key
・
Phillips head screwdriver
・
4mm hex key
Procedure
(1)
(2)
(3)
(4)
(5)
(6)
Reinstate the bolts to secure it in place. (Fig.3-1-3-E)
Using a hex key, unscrew the bolts which fasten the grille to the both
top and bottom of the enclosure.
4 bolts from XY-81/101/122 and 6 bolts from XY-152 are needed to be
removed from the each enclosure.
Gently remove the grille from the front of the enclosure.
(Fig.3-1-3-A)
Unscrew the screw on the rear side of the Logo badge and remove the
Flat washer and the Spacer. (Fig.3-1-3-B)
Relocate the Logo badge to the desired position on the grille. The Logo
badge can be rotated 90 degrees depending on the orientation of the
enclosure. (Fig.3-1-3-C)
Reinstate the grille by gently placing it in place over the front of the
loudspeaker. (Fig.3-1-3-D)
Fig.3-1-3-A
Fig.3-1-3-B
Fig.3-1-3-C
Fig.3-1-3-D
Fig.3-1-3-E
NOTE: XY-122 is shown in the illustration
http://pioneerproaudio.com/
Page 16 / 92
©2018 Pioneer DJ CORPORATION