PRV-9000 Operating Instructions
FCC INFORMATION
The equipment described in this manual has been tested and found to comply with the limits for a Class B
digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are
designed to provide reasonable protection against radio and television reception interference in a
residential installation. There is no guarantee that interference will not occur in a particular installation.
To determine if your unit is causing interference, turn the device OFF. If the unit is causing the
interference, try one or more of the following corrective measures:
•
verify the cables and connectors between components are shielded.
•
increase separation between the unit and components.
• connect the changer into an outlet or circuit different from that which the components are
connected.
•
consult dealer or experienced radio/television technician for help.
The Federal Communications Commission offers a handbook that may help you with eliminating
interference. The handbook is titled
Interference Handbook
(stock number 004-000-00493-1) and may be
ordered from the U.S. Government Printing Office, Washington, D.C. 20402.
Warning:
Any changes or modifications to this product that are not authorized by Pioneer could void the
FCC Certification and negate the user’s authority to operate the equipment.
DOC CLASS B COMPLIANCE
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus
set out in the radio interference regulations of the Canadian Department of Communications.
SAFETY CAUTION
Care should always be taken when working with electronic devices. To protect you and your
system from damage or harm, it is important that you first read and then carefully follow the
instructions in this documentation. Take particular care to heed all warnings and cautions marked
on the unit and outlined in this document and the accompanying
PRV-9000 Operating
Instructions
. IGNORING ANY OR ALL INSTRUCTIONS AND WARNINGS MAY CAUSE INJURY TO
THE PERSON(S) OPERATING THE EQUIPMENT, DAMAGE TO THE PRODUCT OR BOTH.
IMPORTANT:
CAUTION
The lightening flash within an
equilateral triangle is intended to alert
the user to the presence of un-
insulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock.
TO PREVENT THE RISK FO ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within a
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the equipment.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
- iii -
