PRV-9000 Operating Instructions
4.10.3 Setting the Recording Mode from the Front Panel
Instructions in this manual are primarily for controlling the recorder through
the remote control. However, the steps below provide directions for using the
front panel to set the recording mode on the PRV-9000.
1. Press
FUNCTION
until
REC MODE?
appears in the window.
2. Turn the
Smart Jog
dial to scroll through recording mode options.
Video Mode: V1 (high quality) or V2 (standard)
VR Mode: SP (standard) or MN (manual)
Note: If selecting MN, press FUNCTION again and turn the SMART JOG dial
to select a rate level.
3. Wait 10 seconds for the unit to save the settings and dismiss the menu.
4.10.4 Adjusting the Audio Recording Level from the Front Panel
If the audio is too high or too low, check the audio level meter located on the
front of the recorder. The steps below explain how to adjust the audio from
the front panel.
1. Press
FUNCTION
until
REC LEVEL?
appears in the window.
2. Turn the
Smart Jog
dial to adjust the volume level.
3. Monitor the audio level meter on the front panel.
If the red bars at the end of the meter are lighting then the audio level is
too high.
4. Wait 10 seconds for the recorder to save the settings and dismiss the
menu.
4.10.5 Recording from Broadcast Television
TV recording begins automatically and continues to the end of the disc unless
recording is stopped. Follow the instructions below to record from a broadcast
program.
Note: When recording to VR mode at any quality level excluding MN 32, it is possible
to record both the main and the SAP audio streams. The sound can be switched
between the streams during disc playback. This function is unavailable in Video
mode and in VR mode – level 32.
Follow the instructions below to record a television broadcast.
1. Power ON the PRV-9000.
2. Confirm that the TV input is set to the recorder.
52
