PRV-9000 Operating Instructions
To view the Program List, press
SHIFT
then
PROGRAM
on the remote
control.
To add a pause between List entries, press the
PAUSE
button instead of a
number button then press ENTER to add the pause. If there is already a
number in that space, all entries after that point are forced down one step in
the List. Add pauses anywhere except as the first step or the last step in a
Program List. After a pause, press
PLAY
to resume/continue playback.
To delete an entry from the Program List, position the cursor over the entry
then press
CLEAR
. All following entries move up by one entry line. To delete
a Program List, stop the disc playback then press
CLEAR
. Unless the
Program List is stored in the recorder’s memory, the List is also erased when
the disc is removed or the recorder’s power is turned OFF (standby mode).
To insert a line within a Program List, position the cursor over the desired slot
and enter the title/chapter/track. Press
ENTER
to store the entry and to force
all following entries to drop down by one step.
To cancel a playing Program List without stopping the disc playback, press
CLEAR
. The disc continues playing from the current sequence but the List
entries are ignored.
Occasionally during List playback, the start of a non-programmed chapter
briefly appears on screen. This is not a malfunction but a part of the process
to change from the end of one chapter to the next programmed chapter.
To add a currently playing title/chapter/track to the Program List, press
SHIFT
then hold down the
PROGRAM
button for at least two seconds. If the
Program List is not already present, the recorder creates a new List with the
current sequence as the first entry. For DVDs, if the recorder last created a
Program List by title then the new List is also by title. If the disc has never
had a Program List then the recorder creates a Chapter Program List.
Note: All chapters in a Program List must be within the same title.
To delete a stored Program List for a DVD, access the program menu (press
SHIFT
then
PROGRAM
) and change the Program Memory option to OFF.
A Program List may have up to 24 entries. The PRV-9000 stores up to 24
Program Lists in the recorder’s memory.
5.5.2 CD Program List
The Program Memory retains Program Lists for a maximum of 24 discs with
each List containing up to 24 entries. The directions below provide step-by-
step instructions to create a Program List for a CD or Video-CD disc.
67
