PRV-9000 Operating Instructions
2.2.4 Connect to Other A/V Sources – Satellite/Cable
The PRV-9000 supports several AV products including VCRs, satellite tuners
and camcorders.
Connect to a VCR / Satellite Receiver:
1. Connect the VCR’s (or receiver)
Video Output to the
Video Input
.
S-Video In
with an S-Video cable
(not provided) or
Video In
jack
with supplied cable
2. Connect the VCR’s audio outputs
to
Audio IN L/R
with a standard
stereo audio cable (not provided).
Connect to a Cable Box or Satellite Receiver:
If the cable box or satellite receiver provides less than five scrambled
channels, refer to the following diagram for assistance. For systems with six
or more scrambled channels, please refer to the following section.
1. Connect RF cables as shown with the
antenna/cable line connected to the
PRV-9000.
2. Connect the recorder’s
Audio Output 2
to the TV’s audio input using a stereo
audio cable (not supplied).
3. Connect the recorder’s
Video Output 2
to the TV’s video input using a BNC
cable (not supplied).
4. Connect audio/video outputs from the
cable box/satellite tuner to the
recorder’s
INPUT 2/AUTO REC
posts
using a stereo audio cable and a BNC
video cable, respectively.
(enables watching/recording scrambled
television broadcasts)
The diagram shows standard video connections. As an alternative, you can
use the S-Video or Component Video (BNC) connections if available.
The PRV-9000 provides a
Cable TV Input
for recording programs from cable.
Please refer to your cable box instructions for any additional configuration
information.
Note: For high-quality playback, send audio and video signals through an AV receiver.
16
