PRV-9000 Operating Instructions
Follow the directions below to restore default settings.
1. Power ON the recorder.
2. Remove any discs left in the tray.
3. Close the tray.
4. Hold down the
STOP
button on the recorder’s front panel.
5. Press the
STANDBY/ON
button (front panel).
6. Continue holding down the
STOP
button until the display on the front
panel clears.
The display shows only placeholders for the time.
7. Power ON the recorder and operate as normal.
All settings have returned to the default/factory settings.
4.2
Using the Built-in TV Tuner
4.2.1 Changing TV Channels
To change the channel when a disc is not playing, use the number pad or the
CHANNEL
button on the remote or use the
SMART JOG
on the front panel.
Note: Channels programmed through the antenna are numbered 2 through 69 and
cable channels are numbered 2 through 125.
Remote Control – Number Pad
: Input the channel then press
ENTER
.
Ex: Select Channel 4 – Press the digit 4 then press ENTER.
Select Channel 39 – Press the digit 3 then the digit 9. Press ENTER.
As an alternative method for two-digit numbers, press the _/_ _ button
followed by the two-digit channel number.
Remote Control – Channel button
: Press the C or – button to
scroll through the channels.
Front Panel – Smart Jog
: Press the
FUNCTION
button until
CHANNEL?
appears in the display. Turn the Smart Jog wheel to change the channel.
4.2.2 Changing Audio Channels
Some TV programs are broadcast with both a main and a secondary audio
channel (SAP). Use the
Audio
button to change the audio playback track.
34
