PRV-9000 Operating Instructions
6.1.4 Edit Timer Recording Settings
Refer to the following guidelines when editing a Timer program:
Previous timer recording program(s) may not be in progress
Disc tray can be empty or contain a disc
Return to the number field to lock in changes
Check available disc space after changes
To edit a timer recording setting, follow the directions below.
1. Power ON the recorder.
2. Press
SETUP
to reveal the Setup menu.
3. Select
Timer Rec
from the menu or select
Disc Timer Rec
if the disc
timer option is active.
The Timer Recording program appears on screen with 8 entry lines
available.
4. Make your changes to one or more line entries.
5. Press
SETUP
to exit the menu.
6. Set the recorder to Standby prior to the next timer recording selection.
6.1.5 Extend a Timer Recording in Progress
Follow the directions below to adjust the stopping point of a timer recording
session after the program begins recording.
1. Press and hold the
REC
button for approximately three seconds.
The timer program appears on screen.
2. Press
REC
to extend the recording session by 30 minutes.
3. Continue pressing
REC
to extend the recording session.
Each button-press equals an additional 30 minutes with a maximum
recording time up to six hours depending upon your media format and
the recording mode.
4. Wait three seconds while the recorder registers the changes and
automatically closes the menu.
77
