PI H-845 Скачать руководство пользователя страница 42

Страница: 42 / 84

5 Installation

Version: 2.1.1

MS222E

H-845 Hexapod System

5.3 Attaching the Snap-on Ferrite

INFORMATION

The 000015165 snap-on ferrite ensures the electromagnetic compatibility of the
hexapod system. It is intended for permanent attachment to the power supply cable
of the hexapod.



When attaching the snap-on ferrite, make sure that it is correctly positioned on

the cable. The snap-on ferrite can only be removed with special tools (not
included in the scope of delivery).



Attach the snap-on ferrite to the power supply cable of the hexapod before you

connect the hexapod to the power supply for the first time.

Tools and accessories



000015165 snap-on ferrite, included in the scope of delivery (p. 19)

Permanently attaching the snap-on ferrite

1. Put the power supply cable of the hexapod into the open snap-on ferrite

approx. 10 to 15 cm behind the D-sub 3W3 connector (m) that is intended for
connection to the power supply.

2. Close the snap-on ferrite:

a) Align the cable so that it is not squeezed when the snap-on ferrite is

closed.

b) Carefully press the two halves of the snap-on ferrite around the cable

until the lock engages.

5.4 Mounting the Hexapod on a Surface

CAUTION

Possible squeezing during mounting!

When positioning the hexapod on a surface there is a risk of minor injuries due to the
mass of the hexapod.



When you hold the hexapod by the base plate to position it on a surface: Ensure

that your hands remain in a position where they cannot be squeezed.

Содержание H-845





















































































Результаты поиска

Содержание H-845

Отзывы:

Похожие инструкции для H-845

Бренды по названию

Популярные бренды

PI H-845, Руководство пользователя

Результаты поиска

Содержание H-845

Отзывы:

Похожие инструкции для H-845

Бренды по названию

Популярные бренды