Phoenix Contact FL SWITCH MM HS UM E Скачать руководство пользователя страница 4

Страница: 4 / 292

Please observe the following notes

PHOENIX CONTACT

General terms and conditions of use for technical documentation

Phoenix Contact reserves the right to alter, correct, and/or improve the technical documentation and the products de-

scribed in the technical documentation at its own discretion and without giving prior notice, insofar as this is reason-

able for the user. The same applies to any technical changes that serve the purpose of technical progress.

The receipt of technical documentation (in particular user documentation) does not constitute any further duty on the

part of Phoenix Contact to furnish information on modifications to products and/or technical documentation. You are

responsible to verify the suitability and intended use of the products in your specific application, in particular with re-

gard to observing the applicable standards and regulations. All information made available in the technical data is sup-

plied without any accompanying guarantee, whether expressly mentioned, implied or tacitly assumed.

In general, the provisions of the current standard Terms and Conditions of Phoenix Contact apply exclusively, in par-

ticular as concerns any warranty liability.

This manual, including all illustrations contained herein, is copyright protected. Any changes to the contents or the

publication of extracts of this document is prohibited.

Phoenix Contact reserves the right to register its own intellectual property rights for the product identifications of

Phoenix Contact products that are used here. Registration of such intellectual property rights by third parties is pro-

hibited.

Other product identifications may be afforded legal protection, even where they may not be indicated as such.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Содержание FL SWITCH MM HS UM E





































































































































































































































































































Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы:

Phoenix Contact FL SWITCH MM HS UM E, Руководство пользователя, Страница: 4 / 292

Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы: