Phoenix Contact FL SWITCH MM HS UM E Скачать руководство пользователя страница 162

Страница: 162 / 292

FL SWITCH MM HS

4-82

PHOENIX CONTACT

6874_en_16

Description

Here you can disable the port:

Port disabled

Port enabled

flWorkNetPortLinkMonitoring

OID

1.3.6.1.4.1.4346.11.11.4.2.2.1.8

Syntax

Integer

Access

Read and write

Description

This object can be used to enable link monitoring (message via display and alarm contact)

for the relevant port:

Link monitoring enabled

Link monitoring disabled

flWorkNetPortModus

OID

1.3.6.1.4.1.4346.11.11.4.2.2.1.9

Syntax

Integer32 (0 - 1024)

Access

Read and write

Description

This object can be used to set the transmission mode for the relevant port:

Auto negotiation

10 Mbps half duplex

10 Mbps full duplex

100 Mbps half duplex

100 Mbps full duplex

flWorkNetPortSTPEnable

OID

1.3.6.1.4.1.4346.11.11.4.2.2.1.10

Syntax

Integer

Access

Read and write

Description

This object controls the handling of BPDUs if (Rapid) Spanning Tree is activated:

Firmware with Rapid Spanning Tree Protocol:

RSTP not activated

RSTP activated

Firmware with Spanning Tree Protocol:

STP not activated, port is in:

Fast forwarding mode

STP activated

flWorkNetPortIfIndex

OID

1.3.6.1.4.1.4346.11.11.4.2.2.1.11

Syntax

Integer32 (0 - 1024)

Access

Read

Description

Contains the index of the port according to IEEE 802.3ad.

Glass fiber FX ports only support operation at 100 Mbps full duplex (5).

The auto crossing function is only active when auto negotiation is enabled. If the

transmission speed or transmission mode is set to a fixed value, the auto

crossing function is disabled.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Содержание FL SWITCH MM HS UM E





































































































































































































































































































Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы:

Phoenix Contact FL SWITCH MM HS UM E, Руководство пользователя, Страница: 162 / 292

Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы: