manualshive.com logo in svg

Phoenix Contact FL SWITCH MM HS UM E, Руководство пользователя, Страница: 265 / 292

Поделиться
Скачать
Phoenix Contact FL SWITCH MM HS UM E Скачать руководство пользователя страница 265

Operating as a PROFINET device

6874_en_16

PHOENIX CONTACT

9-1

9

Operating as a PROFINET device

The switch is supported as a PROFINET device in PC WorX Version 5.00.26 or later. In a 

PROFINET application, the PROFINET IO controller is responsible for starting up the 

switch. This includes assigning the IP parameters, comparing the desired/actual 

configuration, and archiving alarms sent by the switch. In the event that a device is replaced, 

the control system detects the replacement device and starts it up automatically. For the 

control program, the switch as a PROFINET IO device provides the link states as a process 

data item.

9.1

FL SWITCH MM HSPreparing the switch for 

PROFINET mode

By default upon delivery the switch operates in "Default" mode and must be set to 

"PROFINET" mode once.

Switching to "PROFINET" 

mode

Two mechanisms are available for switching the mode:

–

Following startup and assignment of an IP address, the operating mode can be 

changed on the corresponding page in WBM (see Section ""Operating Mode" menu" 

on page 4-21)

–

Through configuration via the serial interface (see Section "Management via local V.24 

(RS-232) communication interface" on page 4-123)

When activating "PROFINET" mode, the following default settings are made for operation:

–

The Link Layer Discovery Protocol (LLDP) is enabled with the following configuration 

specifications for PROFINET components:

- Message transmit interval: 5 s

- Message transmit hold multiplier: 2

- TLV port ID with subtype locally assigned in the following format: port-xyz

- TLV chassis ID with subtype locally assigned transmits the station name 

–

The Discovery and Configuration Protocol (DCP) is activated as the mechanism for 

assigning IP parameters.

–

The station name (system name) is deleted if the value for the "System Name" object 

contains the device type (default upon delivery).

–

The MRP protocol is not activated.

In addition, when switching to "PROFINET" mode, the configuration is saved automatically 

and the device is restarted.

The switch then starts in "PROFINET" mode for the first time and waits for a name and a 

PROFINET IP address to be assigned. At this point, the switch is already visible in the 

network via LLDP with the default name "FL SWITCH MM HS" and the IP address "0.0.0.0".

Waiting for a valid IP configuration via DCP is indicated by the switch with "dP" in the display 

and by the flashing of the LED for the currently active mode.

The switch cannot be accessed via other network services such as ping at this time.

RSPSupply  -  1-888-532-2706 -  www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Содержание FL SWITCH MM HS UM E





































































































































































































































































































Отзывы:

Нет отзывов