Phoenix Contact FL SWITCH MM HS UM E Скачать руководство пользователя страница 275

Страница: 275 / 292

LLDP (Link Layer Discovery Protocol)

6874_en_16

PHOENIX CONTACT

10-1

10 LLDP (Link Layer Discovery Protocol)

10.1

Basics

LLDP

The switch supports LLDP according to IEEE 802.1ab and enables topology detection of

devices that also have LLDP activated.

Advantages of using LLDP:

–

Improved error location detection.

–

Improved device replacement.

–

More efficient network configuration.

The following information is received by or sent to neighbors, as long as LLDP is activated:

–

The device sends its own management and connection information to neighboring

devices.

–

The device receives management and connection information from neighboring

devices.

Displaying LLDP

information

The information that is collected is presented in a table in WBM. The table includes the port

numbers that are used to connect both devices together, as well as the IP address, the

device name of neighboring devices, and the device type.

LLDP general

The Link Layer Discovery Protocol (LLDP) according to 802.1ab is used by network devices

to learn and maintain the individual neighbor relationships.

Function

A network infrastructure component transmits a port-specific BPDU (Bridge Protocol Data

Unit), which contains the individual device information, at the "Message Transmit Interval"

to each port in order to distribute topology information. The partner connected to the

relevant port learns the corresponding port-specific neighbors from these BPDUs.

The information learned from the BPDUs is saved for a defined period of time as the TTL

value (TTL - Time To Live). Subsequent receipt of the same BPDUs increases the TTL value

again and the information is still saved. If the TTL elapses, the neighbor information is

deleted.

A MMS/MCS manages a maximum of 50 items of neighbor information, all other

information is ignored.

If several neighbors are displayed on one switch port, then there must be at least

another

switch/hub installed

between

this switch and the neighbor indicated, which LLDP does

not support or has not activated.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Содержание FL SWITCH MM HS UM E





































































































































































































































































































Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы:

Phoenix Contact FL SWITCH MM HS UM E, Руководство пользователя, Страница: 275 / 292

Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы: