manualshive.com logo in svg

Phoenix Contact FL SWITCH MM HS UM E, Руководство пользователя, Страница: 228 / 292

Поделиться
Скачать
Phoenix Contact FL SWITCH MM HS UM E Скачать руководство пользователя страница 228

FL SWITCH MM HS

5-16

PHOENIX CONTACT

6874_en_16

5.2.5

Configuration notes for Rapid Spanning Tree

In contrast to the Spanning Tree method, the Rapid Spanning Tree method supports event-

controlled actions that are no longer triggered based on a timer.

If one cable fails (link down), the Rapid Spanning Tree method can respond more quickly to 

this failure and thus the switch-over time can be kept low. 

–

For short switch-over times, structure your network in such a way that a maximum of 

seven switches are located in a cascade up to the root switch. The switch-over times 

can range from 100 ms to 2 s.

–

Use priority assignment to specify a central switch as the root. 

–

It is also recommended to assign a switch as the backup root.

–

For short switch-over times, all switches in the redundant topology should support the 

Rapid Spanning Tree Protocol and should not use hubs.

5.2.5.1

Connecting the switches to form a meshed topology

Having activated (Rapid) Spanning Tree for all switches, you can create a meshed topology 

with redundant data paths. Any data links can now be created without taking loops into 

consideration. Loops can even be added on purpose in order to create redundant links.

A data path between Spanning Tree switches can be:

–

A direct connection.

–

A connection via one or more additional switches that do not support Spanning Tree.

–

A connection via one or more additional hubs that do not support Spanning Tree.

Furthermore, a data path can also consist of a connection of a Spanning Tree switch to:

–

A termination device.

–

A network segment in which 

no

 loops may occur, which consists of several 

infrastructure components (hubs or switches) without Spanning Tree support.

A link down or link up must be detected at the switch so that the RSTP switches can detect 

a line failure and a restored line more quickly. Please take into consideration, in particular, 

paths where media converters are used. If required, media converters offer setting options 

to transmit the link status of the fiber optic side to the twisted pair side.

If a link down is not detected at the switch because the cable interrupt is between the 

media converters, and no link down is forced at the switch, timer-based detection is 

activated, which may result in longer switch-over times.

If Spanning Tree is not supported by all of the switches used, the reconfiguration time for 

Spanning Tree is extended by the aging time of switches without Spanning Tree support.

RSPSupply  -  1-888-532-2706 -  www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Содержание FL SWITCH MM HS UM E





































































































































































































































































































Отзывы:

Нет отзывов