Phoenix Contact FL SWITCH MM HS UM E Скачать руководство пользователя страница 120

Страница: 120 / 292

FL SWITCH MM HS

4-40

PHOENIX CONTACT

6874_en_16

–

RSTP elected this switch as new root.

–

IGMP Snooping enabled.

–

IGMP Snooping disabled.

–

IGMP Querier enabled.

–

IGMP Querier disabled.

–

Better query received.

–

Better query received in vlan xy.

–

Become active querier.

–

Become active querier in vlan xy.

–

GVRP enabled.

–

GVRP disabled.

–

Power Supply US1 lost.

–

Power Supply US2 lost.

–

Power Supply US1 and US2 are connected now.

–

LLDP Agent enabled.

–

LLDP Agent disabled.

–

LLDP recognized new neighbor at port xy.

–

LLDP neighborhood information changed at port xy.

–

LLDP neighbor information become obsolete at port xy.

–

Power over Ethernet fault detected at least one port.

–

No Power over Ethernet faults detected any more.

–

One of the interface modules is not supported by the system hardware. The interface

will be able to send or receive data but cannot be diagnosed.

–

A Profinet connection was established.

–

The Profinet connection was terminated.

–

Diagnosable POF module: OK on port xy.

–

Diagnosable POF module: Warning level reached on port xy.

–

Diagnosable POF module: Critical status on port xy.

–

Configuration difference detected.

–

Configuration difference detected at slot.

–

Configuration difference removed.

–

MRP Client enabled/MRP disable.

–

MRP Manager enabled/MRP disable.

–

MRP Ring failure detected/MRP Ring closed (OK).

–

MRP Manager detects a closed loop.

"Diagnostics/MAC Address Table" menu

Here, you will find a list of which MAC address has been detected at which switch port and

its VLAN ID. If no packets are received at a port for a duration longer than the aging time,

the entry is deleted.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Содержание FL SWITCH MM HS UM E





































































































































































































































































































Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы:

Phoenix Contact FL SWITCH MM HS UM E, Руководство пользователя, Страница: 120 / 292

Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы: