Phoenix Contact FL SWITCH MM HS UM E Скачать руководство пользователя страница 36

Страница: 36 / 292

FL SWITCH MM HS

2-4

PHOENIX CONTACT

6874_en_16

Removal:

Remove all plug-in connections or interface modules.

To release the plug-in connection for the system interface, insert a screwdriver in the

notch provided and use it to push the modules apart.

Push the right-hand extension module along the DIN rail to the right until the plug-in

contact is completely free.

Pull down the holding latches using a suitable tool (e.g., screwdriver).

Then swivel the bottom of the module away from the DIN rail slightly (A). Next, lift the

module upwards away from the DIN rail.

Figure 2-5

Removing extension modules

NOTE:

Switch off the supply voltage before removing the extension modules.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Содержание FL SWITCH MM HS UM E





































































































































































































































































































Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы:

Phoenix Contact FL SWITCH MM HS UM E, Руководство пользователя, Страница: 36 / 292

Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы: