Phoenix Contact FL SWITCH MM HS UM E Скачать руководство пользователя страница 258

Страница: 258 / 292

FL SWITCH MM HS

8-4

PHOENIX CONTACT

6874_en_16

If GVRP is active, the switch sends GVRP BPDUs every ten seconds. If the VLAN

assignment of

a port

to a specified VLAN is changed, the adjacent switches will be

informed of this change within the next 10 seconds.

When the GVRP is disabled, the adjacent switches also remove the dynamically learned

ports within the next 10 seconds. If GVRP packets are missing, the learned group

assignments are rejected after approximately 20 seconds.

If a static VLAN is installed on a switch, a port can be added to this VLAN via GVRP. The

port is listed in the Current VLANs Table. However, only statically created group members

are saved.

8.4

Current VLANs

The "Current VLANs" web page provides an overview of the VLANs currently created. In

addition, refer to the table for the VLAN in which the switch is actually managed (see also

""IP Configuration" web page" on page 4-13). All static and dynamic VLANs are listed here.

A distinction is made between tagged (T) and untagged (U) group members, as well as non-

members (-) (see possible states on page 8-5).

Figure 8-2

"Current VLANs" web page

When the maximum number of created VLANs (static and/or dynamic) is reached, the

following text appears below the key for the member states: "The switch supports only 32

VLANs! Further VLANs will be refused!"

VLAN 1 is always created statically and all ports are added to it as untagged members.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Содержание FL SWITCH MM HS UM E





































































































































































































































































































Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы:

Phoenix Contact FL SWITCH MM HS UM E, Руководство пользователя, Страница: 258 / 292

Результаты поиска

Содержание FL SWITCH MM HS UM E

Отзывы: