2/3
C 41
Start up of the M4 monitoring system
G 03901 - Edition 04. - December 10
Position the main switch to
position
1
.
The “mains on“ light indicator
comes on : «
pump ready
».
The monitoring displays the state of the pump.
The star appears on the left side of
the display and indicates that the
control has been taken by hand-
held remote (control taken to
check the direction of rotation).
The M4 monitoring system has been configured in the factory
according to the options and accessories defined during the order.
This configuration allows the pump to run (
C 43
).
If parameters have to be customized by the user, it is necessary to
gain access to the program.
The programing made at the factory is protected by an access code
which disables parameter modification.
Press the
SET
key.
Valid the code with
ENTER
.
(*0* factory configuration).
Access code and parameters can
be customized (
C 42
).
* 1H LOC N2 ROOTS
PUMPING STOPPED
03/15/09 15:39
Pump start-up
Access to
the parameter settings
ENTER PASSWORD :
---------------------------------------------
*0*
adixen Vacuum Products - A3H Series Operating instructions
