G 03534 - Edition 02 - June 10
1/1
E 20
Increase of the mainteance parameters
When the maintenance of an element has been done,
it is
necessary to increase to the next maintenance time to stop
the warning
of this element.
The zero-set-up of the maintenance parameters will be done in a
service center during a total maintenance.
Press the
SET
key.
Press the key
+
and
–
until the
code is obtained
(factory setting = 0)
Validate with the ENTER key.
Press the
+
key repeatedly to
access to
MAINTENANCE
menu.
Validate with the
ENTER
key.
Press the
+
key repeatedly to
access to the choosen menu.
Validate with the
ENTER
key.
The fresh screen appears.
Use the
+
keys to increase the
maintenance duration time.
Validate with the
ENTER
key.
Return to the main menu and exit the setting mode using the
SET
key.
OVERHAUL WARNING
17000
>>> MIN: 1000H <<<
MAX: 65500H
DEFINITION MENU
SETTING
>>> MAINTENANCE <<<
MANAGEMENT
>>> OVERHAUL WARNING <<<
Increase of the
maintenance
parameters
Table of maintenance
17000
34000
0
Overhaul maint.
Time in Hour
17000 h
or 2 years
reset to 0
17000 h
or 2 years
Pump counter
(at service center site)
Overhaul maintenance
reset to 0
Overhaul maint.
(at service center site)
Access to the parameter
programing
Access to choosen
parameter menu
ENTER PASSWORD
«0»
adixen Vacuum Products - A3H Series Operating instructions