Introduction
225
Model 1001MC Operations Guide
10 • HTTP/HTML web page reference
•
monitor
—The monitor level password enables you to view statistics, but it will not let you make any config-
uration changes. To log into the system at the monitor level, type
monitor
, all lower case, for the username
and password.
Note
The superuser and monitor passwords are set in the unit as the
default passwords. For proper security, make sure that during your
initial setup, you change the passwords.
After logging in, the system displays the
HOME
page (see
figure 107
).
Figure 107. HOME page
HOME
The
HOME
page displays a quick overview of the system including; error and warning indications, software
information, box names, number of modems installed, and so on.
On the left side of the
HOME
page is the Navigation View. The list on the left side of the screen allows you to
navigate to any page from this point. The navigation page will always be available to you so you can change
from one page to the next.
The
Record Current Con
fi
guration
button lets you store configuration changes made to the box.
Note
If configuration changes are not stored into memory, they will be lost
if the unit is powered down.
Содержание NetLink 1001MC
Страница 10: ...10 Chapter 1 Introduction Chapter contents Introduction 11 Model 1001MC management overview 14...
Страница 43: ...Saving HTTP HTML object changes 43 Model 1001MC Operations Guide 3 Getting started Figure 18 1001MC command map...
Страница 232: ...About 1001MC 232 Model 1001MC Operations Guide 10 HTTP HTML web page reference Figure 113 System Level Information page...