![background image](http://html1.mh-extra.com/html/patton-electronics/netlink-1001mc/netlink-1001mc_operation-manual_4058945177.webp)
Modem Information page MIB variables description
177
Model 1001MC Operations Guide
8 • Model 2707RC management
Figure 90. Web page navigation to Slot Configuration page
For more information about items on the
Slot Configuration
page, see
“Slot Configuration page MIB variables
description”
on page 185.
Modem Information page MIB variables description
This section describes the MIB variables that are available on the
Modem Information
page.
Slots Available (totalConfigSlots)
Displays the number of configurable slots available in the rack.
Modems Installed (rackXCardsInstalled)
Displays the number of modem cards installed in the rack that the system has found.
Number of Power Supplies (rackXPowerSupplies)
This is where you specify the number of power supplies installed in the rack (this value determines the addressing
range for the rack). In the case of a redundant power supply system, you should set this variable to 2, this will
inform the Model 1001MC that there should be 2 power supplies in the system.
Rack Protection Mode
If you want to protect all Model
2707RC
rack cards installed in the current rack from being globally config-
ured, select
protected(1)
from the pop-up menu, then click the
Submit
button. For more information about the
system configuration feature, refer to section
“System Config”
on page 259.
Note
Setting the
Rack Protection Mode
to
normal(0)
will enable the rack to
receive new configurations through the global configuration command.
Содержание NetLink 1001MC
Страница 10: ...10 Chapter 1 Introduction Chapter contents Introduction 11 Model 1001MC management overview 14...
Страница 43: ...Saving HTTP HTML object changes 43 Model 1001MC Operations Guide 3 Getting started Figure 18 1001MC command map...
Страница 232: ...About 1001MC 232 Model 1001MC Operations Guide 10 HTTP HTML web page reference Figure 113 System Level Information page...