Creating and modifying global configuration templates
216
Model 1001MC Operations Guide
9 • Model 3088RC management
•
SW Test Mode
(testModeSet3088RC)
This displays any test mode invoked through the NMS. See next configuration for information about
invoking test modes through the NMS. This option will be highlighted in blue if the unit is in test mode.
-
none(0)-No test mode in process
-
lal(1)-Local loopback test
-
rdl(2)-Remote loopback
•
FP Switch
(Front Panel)
-
disabled (0)—disables the toggle switches on the front panel of the 3088RC rack card
-
enabled(1)—enables the ability to use the front panel toggle switches
•
Response to Test Mode
, refers to the initiation of loopbacks via one of the DTE signals.
-
disabled(0)—no loopbacks can be initiated by a DTE signal
-
enabled(1)—Loopbacks can be initiated by a DTE signal.
Refer to section
“Applying a template”
on page 217 to activate the template.
Modifying a template
This section describes how to modify a global configuration template.
Figure 102. Global Configuration Menu page
Do the following to modify a template:
Содержание NetLink 1001MC
Страница 10: ...10 Chapter 1 Introduction Chapter contents Introduction 11 Model 1001MC management overview 14...
Страница 43: ...Saving HTTP HTML object changes 43 Model 1001MC Operations Guide 3 Getting started Figure 18 1001MC command map...
Страница 232: ...About 1001MC 232 Model 1001MC Operations Guide 10 HTTP HTML web page reference Figure 113 System Level Information page...