System Level Information
235
Model 1001MC Operations Guide
10 • HTTP/HTML web page reference
Import Configuration
To import a configuration file into the access server, type the complete path and filename for the configuration
file you wish to load or click on the
Browse…
button to select the desired file, then click on the
Submit Query
button (see
figure 114
on page 233).
Upon successfully importing the file, the access server will display
Configuration Load Complete
, indicating that
the new operating parameters have been loaded into flash memory.
Click on
HOME
under the
Configuration Menu
, then click on the
Hard Reset
button under
Immediate Actions
.
Note
Do not
select
Record Current Con
fi
guration
after importing configuration
parameters.
System Level Information
Clicking the
Configure Cards
hyperlink on the HOME page displays the
System Level Information
page.
Figure 113
displays a portion of the information page for the NetLink system being managed. The System Level
Information page contains statistical information about the entire system and explains how that information is
broken down among the racks. Each rack can be enabled or disabled from this level. When a rack is disabled, the
1001MC stops polling the addresses contained in the specified rack. The 1001MC’s ability to stop polling is use-
ful when installing less than eight racks or when taking cards offline in order to perform servicing. The modems
installed in the system will continue to operate at the last setting provided. This page also allows you to clear
alarms on a per-rack or system basis. Each rack view also contains a
View Rack
hyperlink to the
Modem Informa-
tion
page (see section
“Modem Information Rack X”
on page 239 for more information). The following sections
describe the variables contained within the System Level Information page.
System Overview
This section of the System Level Information window (see
figure 113
on page 232) does the following:
•
Displays status information compiled from all Model 1001 racks in the system
•
Provides several test patterns for use when running diagnostics in system test mode
•
Enables you to apply global system configurations to Model 1095RC, 2701RC, and 2707RC rack cards
installed in the system
Apply System Configuration
If you are applying a global configuration to all Model 1095RC, 2701RC, and 2707RC rack cards in the sys-
tem, select the desired template from the pop-up menu, then click the
Apply Con
fi
guration
button. For more
information about the system configuration feature (including how to protect rack cards and racks from being
modified), refer to section
“System Config”
on page 259.
Содержание NetLink 1001MC
Страница 10: ...10 Chapter 1 Introduction Chapter contents Introduction 11 Model 1001MC management overview 14...
Страница 43: ...Saving HTTP HTML object changes 43 Model 1001MC Operations Guide 3 Getting started Figure 18 1001MC command map...
Страница 232: ...About 1001MC 232 Model 1001MC Operations Guide 10 HTTP HTML web page reference Figure 113 System Level Information page...