Creating and modifying global configuration templates
125
Model 1001MC Operations Guide
6 • Model 1095RC management
– normal(3)
9.
Configure the
Remote Framing Mode
pop-up menu using the following choices:
– slotted(0)
– normal(3)
10.
When you have finished setting the configuration, click on the
Submit
button to save the changes.
Note
If you receive an
invalid configuration
error after creating a configura-
tion, it is resulting from an illegal combination of variables. Refer to sec-
tion
“Illegal configuration messages”
on page 122 for more
information.
Refer to section
“Applying a template”
on page 125 to activate the template.
Figure 62. Global Configuration Menu page
Deleting a template
Do the following to delete a template:
Note
When a template configuration is deleted, it cannot be recovered.
1.
Select a template from the
Delete Configuration
pop-up menu (see
figure 62
).
2.
Click the
Delete Con
fi
guration
button.
Applying a template
This section describes how to apply a global configuration to all Model 1095RC rack cards other than those
that meet one of the following exceptions:
•
Model 1095RC rack cards installed in Model 1001 racks that have had the
Rack Protection Mode
option
set to
protected(1)
will not be configured if a global template is applied (see section
“Protecting a Model
1001 rack from global configuration”
on page 114 for more information.
Содержание NetLink 1001MC
Страница 10: ...10 Chapter 1 Introduction Chapter contents Introduction 11 Model 1001MC management overview 14...
Страница 43: ...Saving HTTP HTML object changes 43 Model 1001MC Operations Guide 3 Getting started Figure 18 1001MC command map...
Страница 232: ...About 1001MC 232 Model 1001MC Operations Guide 10 HTTP HTML web page reference Figure 113 System Level Information page...