Creating and modifying global configuration templates
215
Model 1001MC Operations Guide
9 • Model 3088RC management
Figure 101
is the
Unit Configuration
section (see
figure 101
) for the configuring E1 link parameters. There are
16 configurable parameters. What follows is a description of them with the available options for each.
Figure 101. Unit Configuration section of the web management table
•
DTE Rate
Use the dropdown menu to select an available DTE rate
•
Clock Mode
, this selects the source of the clock used for the Transmit signal on the E1 channel. Please
note the difference from “Tx Clock Timing” described below.
-
network-CLK(0)—derived from the received signal from the network
-
internal-CLK(1)—driven by the internal oscillator in the 3088RC NTU
-
external-CLK(2)—provided by DTE External Transmit Clock signal
•
DSL Link Enable
(dslLinkEnable3088RC)
-
enable(0)
-
disable(1)
•
Line Probe
(lineProbe3088RC)
Enables or disables the Line Probe feature to negotiate the optimal rate for current line conditions
-
enable(0)
-
disable(1)
•
Annex Type
(annexType3088RC)
Sets the DSL annex type
-
annexA(0)
-
annexB(1)
Содержание NetLink 1001MC
Страница 10: ...10 Chapter 1 Introduction Chapter contents Introduction 11 Model 1001MC management overview 14...
Страница 43: ...Saving HTTP HTML object changes 43 Model 1001MC Operations Guide 3 Getting started Figure 18 1001MC command map...
Страница 232: ...About 1001MC 232 Model 1001MC Operations Guide 10 HTTP HTML web page reference Figure 113 System Level Information page...