Slot Configuration
245
Model 1001MC Operations Guide
10 • HTTP/HTML web page reference
To configure the remote circuit ID, type the ID into the
Remote Circuit ID
text box, then click the
Submit
but-
ton {located next to the
Remote Circuit ID
text box) to save the changes.
Note
After submitting the card identification information, you must click
on the
Record Current Con
fi
guration
button located on the
HOME
page to store the configuration changes into memory (see
“HOME”
on page 228 for more information).
Clear Remote Circuit ID button.
If you want to delete the remote circuit ID information, click on the
Clear
Remote Circuit ID
button, then click on the
Submit
button.
Alarm Information
Clear Slot Alarms (resetStatus)
Selecting this push button erases the alarms (errors and warnings) associated with the specified slot.
Note
Errors and warnings will still be listed in the System Log.
Hardware Reset (resetStatus)
Selecting this button will force the current rack card modem to perform a hardware reset.
Card Lost Indication (cardLostIndication)
This variable lets you choose what type of indication will be made if a modem is removed from the manage-
ment system. The following options are available:
•
none(0)
•
warning(1)—If a card lost situation occurs, it will be displayed in yellow highlighting as a warning on the
HOME
,
System Level Information
, and
Modem Information Rack
pages.
•
error(2)—If a card lost situation occurs, it will be displayed in red highlighting as an error on the
HOME
,
System Level Information
, and
Modem Information Rack
pages
Line Down Indication (lineDownIndication)
This variable allows you to choose what type of indication will be made if a modem reports a line down sce-
nario. The following options are available:
•
none(0)
•
warning(1)—If a line down situation occurs, it will be displayed in yellow highlighting as a warning on the
HOME
,
System Level Information
, and
Modem Information Rack
pages.
•
error(2)—If a line down situation occurs, it will be displayed in red highlighting as an error on the
HOME
,
System Level Information
, and
Modem Information Rack
pages
Note
Line Down Indication
must be set to
error(2)
in order for line-up and
line-down SNMP trap messages to be sent.
Содержание NetLink 1001MC
Страница 10: ...10 Chapter 1 Introduction Chapter contents Introduction 11 Model 1001MC management overview 14...
Страница 43: ...Saving HTTP HTML object changes 43 Model 1001MC Operations Guide 3 Getting started Figure 18 1001MC command map...
Страница 232: ...About 1001MC 232 Model 1001MC Operations Guide 10 HTTP HTML web page reference Figure 113 System Level Information page...