![background image](http://html1.mh-extra.com/html/patton-electronics/netlink-1001mc/netlink-1001mc_operation-manual_4058945034.webp)
LED indicators
34
Model 1001MC Operations Guide
2 • Hardware installation
Installing the RS-232 configuration/daisy-chain port cable
The DB-25 connector is a DTE-configured RS-232 port that is used to set up your IP address, subnet mask,
and default configuration. After the system is set up, the configuration port can be used to connect to a Model
1001CC in a separate rack if you are daisy-chaining multiple racks.
Figure 13. RS-232 DTE configuration port
Note
The configuration port on your 1001MC, being a DTE, requires a
null modem or equivalent cable when connecting to a terminal.
Using personal computer communications software (Procomm, Windows Terminal, BitCom, PC Anywhere,
etc.), set the configuration of your communications software to the following parameters:
•
Data Rate
: 19,200 bps
•
Async. Character Format
: 8 Data Bits, 1 Stop Bit, No Parity
•
Terminal Emulation
: VT-100 (or similar) terminal emulation
LED indicators
The 1001MC front card has status LEDs (see
figure 14
) that display at-a-glance the current operational status
of the 1001MC.
Figure 14. Front card LEDs
Содержание NetLink 1001MC
Страница 10: ...10 Chapter 1 Introduction Chapter contents Introduction 11 Model 1001MC management overview 14...
Страница 43: ...Saving HTTP HTML object changes 43 Model 1001MC Operations Guide 3 Getting started Figure 18 1001MC command map...
Страница 232: ...About 1001MC 232 Model 1001MC Operations Guide 10 HTTP HTML web page reference Figure 113 System Level Information page...