![background image](http://html.mh-extra.com/html/gree/wsbec02/wsbec02_instructional-manual_2260774001.webp)
Module Installation
Universal Wi-Fi Kit
INSTRUCTIONAL GUIDE
WSBEC02/WSBEE03
STEP 1.
Open the front panel of indoor unit
Remove screw to access the electrical box.
NOTE:
Actual product may differ from images shown; please refer to actual products.
STEP 2.
Remove the electrical box cover
Locate Wi-Fi module connector and wire. (The Wi-Fi connector will be the same
color as the connector on the Wi-Fi module.)
STEP 3.
Remove the wire clip
Route Wi-Fi module wire into electrical box and connect to the unit's Wi-Fi connector.
NOTE:
The Wi-Fi module wire must be routed through the wire channel, otherwise
the electrical box cover will not close properly.
STEP 4.
The Wi-Fi module mounting location varies from model to model
To the right are the common mounting locations. Choose the one that best fits your
model. Place the Wi-Fi module in the mounting location and secure it with a screw.
STEP 5.
Replace the electrical box cover and secure with a screw
The Wi-Fi module installation is complete.
Front panel
Wire clip
Wi-Fi connector
Wi-Fi module
Wi-Fi module
Wi-Fi module
Wi-Fi module
Wi-Fi module wire
Screw
Electrical
box cover
1.
2.
3.
4.
Failure to follow this warning could result in personal injury or death.
•
Before installing, servicing or modifying the system, the main electrical disconnect
switch must be in the OFF position. There may be more than one disconnect switch.
Lock out and tag all switches with a warning label.
•
Installation must be performed by qualified professionals. Otherwise, it may result
in personal injury or damage.
WARNING –
ELECTRIC SHOCK HAZARD