PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
23
Secure Mode
Secure Mode is the normal operating mode. Each panel/tray will be in Secure Mode
under normal operating conditions.
Once the panel/tray is in Secure Mode, any unauthorized changes that occur in the
patch field will result in a “Secure Violation,” and a red LED will light above the port
identifying the violation. The LED will remain red until the violation has been cleared
(see Secure Violations, later in this section).
Identifying Secure Mode
In Secure Mode, the System Status Indicator LED (SYS) remains solid green. All other
indicator LEDs are off. The figure below shows the IU in Secure Mode.
NOTE: The SYS LED for the PM will briefly flash amber every 10 seconds.
Figure 19: Secure Mode
Entering Secure Mode
Secure Mode is the default mode after initial power up. It is also the mode to which the
system typically returns after resets or following the completion of activities initiated by
other modes.
Secure Mode can be accessed through:
• PViQ™ Connectivity Web UI
• PViQ™ Connectivity Interface Unit (IU) Function Keys
• PViQ™ Connectivity Command Line Interface (CLI)
• SmartZone Connectivity Software Module
Secure Violations
All changes made to the patch field should be initiated through the PViQ™ Connectivity
