PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
36
The patching page allows provisioning of the panel ports. This page is used to
customize the port attributes. You can configure each port to what the port should
expect (setting/clearing the security policy for the port).
Figure 29: Patching Page
NOTE: If any text in a field does not fit in the field box, float over the text line and a pop
up will provide the full text content.
Page Header
Below the ribbon is the “Panel Port Configuration” page header. Hover over “Help” to
see a description of the page, this description also appears in the “Context Help” box.
Click the “Select a panel” button to open a drop-down menu that allows you to view any
panel in the PViQ™ Connectivity System. There may be 1 to 5 panels in a system.
Each system configuration must contain a PM panel. All subsequent panels are EM
panels.
Near End Attributes Section
In the Near End Attributes section, you can change the port attributes associated with
the near end of a patch cable. This section contains the attributes of the port being
viewed on the Patching Page. All references on this page are with respect to this port.
Some fields are monitor only and others may be customized.
NE Horizontal (Back)
You may customize this field. This field name should identify what is connected to the
back side (permanent link) on this port. After changing this field, click
Save
. The
Cancel
button reverts changes to this field.
