PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
169
2. Select the Telnet radio button in the PuTTY Configuration window.
3. Type in the PViQ™ Connectivity PM IP address obtained earlier and leave all
other settings as default.
4. Select
Open
.
A terminal window will open, wait for the PViQ™ Panel to prompt for a
“Username:”
Default Username is:
admin
Default Password is:
panduit
(or the new password, changed in the earlier
steps)
5. Enter the Username. Press
Enter
.
6. Enter the password. Press
Enter
.
A screen similar to the example below displays.
Figure 130: Pan Shell CLI Ready Window
7. You are now logged into the PViQ™ Panel Manager. Refer to the CLI
Commands list in Appendix C: PViQ™ Connectivity CLI Commands for available
commands.
NOTE: For security purposes, Panduit recommends that you change the default
password as soon as possible. Use the config password command (described in
Appendix C) to change the password.
8. At the command prompt in the Pan Shell CLI Window, type in the following to
turn off the embedded HTTP Web Server on the PViQ™ Panel Manager module.
set http off
9. HTTP and HTTPS are now disabled on this PViQ™ Panel Manager.
