PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
173
panduitProtocolSupportTelnetEnable OID (.1.3.6.1.4.1.19536.7.9.3.1.0).
User Management
•
The default user is “admin” and password is “panduit”. Change the password of
the admin user on your first login.
•
Users of the HTTP Web UI and Telnet CLI share a common authentication
database.
•
Users may be configured to only be allowed access to Telnet, HTTP or both
Telnet and HTTP protocols.
•
Up to 10 system users are configurable.
•
Passwords are encoded using two CRC32 algorithms and stored in non-volatile
memory.
•
The first user (the default “admin” user) is allowed access to a few more
commands than other users.
•
The first user (the default “admin” user) cannot be deleted via the Telnet CLI.
SNMP Trap Notifications
•
Use SNMPv3 trap receivers with authPriv users. Note that SNMPv3 Trap
Receivers are also provided SNMPv3 Agent access.
Email Alarm Notifications
•
Use Authenticated and Encrypted Email Notifications.
•
Because the SMTP Protocol has multiple methods for communicating a
password, the SMTP password is stored unencrypted.
Protocol Access Configuration
•
All management protocols are accessible on the rear Ethernet ports of the
product by default.
•
The provisioning port on the front of the panel only parses LLDP and CDP.
•
Unless needed, do not enable “config snmp enable provision” or “config snmp
enable all”. These commands enable the provisioning port to provide SNMP
Agent access.
Secure Deployment, General Guidelines
•
Disable interfaces that won’t be used.
o
HTTP may be disabled from the Telnet CLI.
