56
57
[Authentic method - User name]
Enter the user name to be required for the authentica-
tion. Enter up to 32 alphanumeric characters exclud-
ing "&" listed in the description of "Note".
[Authentic method - Password]
Enter the password to be required together with the
user name for the authentication. Enter up to 32
alphanumeric characters excluding "&" listed in the
description of "Note". An entered character for the
password will be displayed as "*" or "
•
".
Note:
Available characters are as follows.
•
A B C D E F G H I J K L M N O P Q R S T U V W X
Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 ! # $ % &‘ ( ) * + ,- . / : ; < = > ?
@ [ ¥ ] ^ _ ` { | } ~
[Sender’s address]
Enter the mail address of a sender. Entered mail
addresses will be displayed in the "From" (sender)
line. Enter up to 127 alphanumeric characters includ-
ing hyphens (-), periods (.), @, and _.
Default:
NWDR
[SSL]
Alarm mails or error report mails will be encrypted
and transmitted. When "On" is selected, "SMTP" will
be set for the authentication method. Set the user
name and password for the authentication.
On: Uses the SSL.
Off: Does not use the SSL.
Default:
Off
[Destination address - Address1 - Address4]
Enter the mail addresses of the recipients of the alarm
mail and the warning mail (
☞
page 179). Enter up to
255 alphanumeric characters including hyphens (-),
periods (.), @, and _.
Check the desired mail type (Warning/Alarm) to be
sent.
Up to 4 destination addresses can be registered.
