54
55
Note:
Depending on the network settings, network com-
•
munication may not be established if the HTTP
port number has been changed. In this case, refer
to the administrator of each network.
The following numbers and the FTP port number
•
are unavailable for the HTTP port number.
20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 105, 110,
123, 161, 162, 546, 547, 995, 10001, 10002,
10003, 10004, 10005, 10006, 10007
[FTP port number]
Designate the FTP port number of the recorder.
It is unnecessary to change it for normal use.
1 - 65535
Default:
21
Note:
The following numbers and the HTTP port number
•
are unavailable for the FTP port number.
20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110,
123, 161, 162, 546, 547, 995, 10001, 10002,
10003, 10004, 10005, 10006, 10007
[Attach the alteration detection code (FTP)]
Determine whether or not to attach the alteration
detection code to the recorded images to be down-
loaded from an FTP server.
Off: Does not attach the alteration detection code.
On: Attaches the alteration detection code.
Default:
Off
■
Network Setup [PC port]
Configure the network settings for the PC port of this
product.
[IP address]
Default:
0.0.0.0
[Subnet mask]
Default:
0.0.0.0
[Back] button
Click this button after completing the settings.
Configure the settings relating to the mail notification [e-Mail]
The settings of alarm mail notice, the settings of error report mail (
☞
page 179) and the settings to use the mail
functions can be configured on this tab.
[SMTP server address]
Enter an IP address or a name of the SMTP server to
send e-mails. The name of the SMTP server is availa-
ble only when "Manual" is selected for "DNS" on the
[Basic] tab accessed from the "Advanced setup"
menu - the "Network" page of the setup menu. Enter
up to 255 alphanumeric characters including hyphens
(-) and periods (.).
[SMTP port number]
Enter the port number of the SMTP server.
1 - 65535
Default:
25
[POP server address]
Enter an IP address or name of the POP server to be
used for POP before SMTP authentication. The name
of the POP server is available only when "Manual" is
selected for "DNS" on the [Basic] tab accessed from
the "Advanced setup" menu - the "Network" page of
the setup menu. Enter up to 255 alphanumeric char-
acters including hyphens (-) and periods (.).
[Authentic method]
Select the authentication method to send e-mails
from the following.
None/ POP before SMTP/ SMTP
Default:
None
